Leakage Sensor Typ SVT 05

Typ(en): SVT 05

The STRIKO leakage alarm SVT 05 represents the meaningful further development and indispensable supplement of the proven STRIKO alarm SVT 02. It is furnished with a product side, closed PTFE film that will curve also with a slow press increase which will destroy the conductor circuit. The response pressure is only slightly above the values of the alarm SVT02.

Models

  1. SVT 05
    STRIKO VerfahrensTechnik – Leakage Sensor 05

Advantages in the application

  1. Quick recognition of malfunctions, also for leaking bursting discs (e.g. through pitting corrosion or hairline cracks) or safety valves
  2. Highest corrosion resistance through PTFE film closed on the product side
  3. Ready-to-install delivery
  4. All materials used are asbestos-free
  5. Suitable for all metal and graphite bursting discs, also for third party products
  6. Continous temperature range: -30 °C to +220 °C (directly on leakage sensor)
  7. Can be delivered ex works

Specifications:

Temperature range

-30 ℃ to +220 ℃

max amperage

50 mA

max resistance before bursting

20 Ω

Conductor path material

Silver

Membrane

PEEK

Sealing film

PTFE

Seals

Klingersil C 4400

Power supply cable

Teflon coated, 2 m long other sealing materials can be delivered upon request.

Note on ATEX:

All burst indicators / leakage sensors from STRIKO according to the type of protection are rated “i” intrinsic safety – “simple electrical equipment” when connected to an intrinsically safe circuit. The requirements on “simple electrical equipment” are covered in section 5.7 of the standards EN 60079-11:2012 or IEC 60079-11 Ed. 6:2011-06 “Explosive atmospheres – Part 11: Equipment protection by intrinsic safety ‘i'”. Simple electrical equipment, designed in accordance with the requirements of section 5.7 of the standards EN 60079-11:2012 or IEC 60079-11:2011 and section 16.4 of the standards EN 60079-14: 2014 or IEC 60079-14 Ed. 5: 2013-11 “Explosive atmospheres – Part 14: Electrical installations design, selection and erection” do not require certification; see section 4.4.2 of EN 60079-14: 2014 or IEC 60079-14 Ed. 5: 2013-11. Such parts are also not governed by directive 94/9/EC since they do not feature any potential source of ignition. The designation of simple equipment can be made by any person/institution, including the manufacturer or installer, and made by freely selectable designation marking or coding preferred for the installation/plant.

Individual solutions

Upon request, other nominal widths can be delivered

Your contact for Leakage Sensor Typ SVT 05

Answering your questions precisely and competently - that is our goal.
Simply get in touch directly with your contacts from the divisions.

STRIKO Request Form

Got a specific inquiry?

To Request Form